Easy Petrol Post Driver
The Easy Petrol Post Driver is designed to enable one man to knock any size stake, peg or post into the ground, up to a 4” diameter. The high impact hammer action of 1720 BPM will drive a post into the ground in a matter of seconds, with the power pack being the ultra-reliable & compact Honda GX35T 4-Stroke Engine. The Easy Petrol Post Driver comes as standard with a 78mm (3”) adapter, if you require the 4" adapter please email us after ordering. Easy Petrol Post Driver Benefits Portable – No pipes and generators needed Lightweight, only 15.3kg Ideal for Steep ground and inaccessible locations Physically less demanding than traditional methods Can be used all day without operator fatigue
Notice
This product is available to purchase but requires a conversation with one of our team please fill out the form below and we will be in contact.
The Easy Petrol Post Driver is designed to enable one man to knock any size stake, peg or post into the ground, up to a 4” diameter. The high impact hammer action of 1720 BPM will drive a post into the ground in a matter of seconds, with the power pack being the ultra-reliable & compact Honda GX35T 4-Stroke Engine. The Easy Petrol Post Driver comes as standard with a 78mm (3”) adapter, if you require the 4" adapter please email us after ordering.
Easy Petrol Post Driver Benefits
- Portable – No pipes and generators needed
- Lightweight, only 15.3kg
- Ideal for Steep ground and inaccessible locations
- Physically less demanding than traditional methods
- Can be used all day without operator fatigue
Easy Petrol Post Driver Applications
- Any shape from 10mm – 100mm Ø
- Fencing – Timber and Angle Iron Posts
- Landscaping – Tree Stakes
- Nurseries – Tree and plant support
- Vineyards – Especially steep hillsides
- Farming – Sheep and cattle fencing
- Construction – Temporary fencing/shuttering/ground pinning
- Contractors – Tent Stakes/Ground Anchors/Signage
- Festival/Fair Organisers – Signage/Temporary fencing
What is included?
- A 78mm (3”) adapter. Other adapters are available separately to alter the size according to your post sizes.
- Tough Box and 1 litre Fuel Can.
- Instruction & Servicing Manual– 6mm & 3mm Hex Key
- 5ml Loctite
- 50ml Crank Grease
What is the maximum capacity?
- The maximum capacity of the machine is 4” round diameter.
- Our largest adapter is 107mm internal diameter.
- When the ground is very dry, compacted or stoney, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot-Bar, or mechanically using either our Pilot Core Tool or a mechanical earth Auger. Posts smaller than 78mm should not need a pilot hole. Ground conditions of Clay or Chalk may also require this method.
What adapters do i need?
To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5-10mm larger than your Post. For shaped posts squares / t-shapes etc the outer corners need to be within this capacity.