Postsaver Post Rot Protector SAV 2

The Postsaver Post Rot Protector SAV 2 offers a protector that guarantees your posts against ground-line rot and decay, the number one cause of fence & gate post failure giving a longer life tree stake or fence post.

Pro-Wrap post protectors permanently exclude all the factors required for decay at the ground-line; oxygen, moisture & fungi

Postsaver Pro-Wrap post rot protection excludes all the factors required for decay, locking preservative in and locking moisture, oxygen and fungi out. Preventing costly ground-line rot in your wooden posts.

Postsaver Post Rot Protector SAV 2 is designed for machine round wood stake ranging from 50mm to 100mm diameter only.

How Does Pro-Wrap Protection Work?

1 - Dual-Layer Rot Shield Technology

Postsaver Pro-Wraps feature a dual-layer barrier protection system, that when heated, shrinks onto the post creating a long-lasting, high-performance, air and water-tight seal.

2 - Locks Out Everything Needed For Decay

This seal is the critical element which locks out all the factors required for decay to occur including moisture, fungi and oxygen at the critical ground-line (up to 6 inches or 150mm below ground) of the post.

3 - Rot Can't Occur

When all the factors required for rot and decay are locked out of the post, conventional rot cannot occur. This allows us to guarantee wooden fence posts for 20 years*

How Easy Is It To Apply Protection?

All you need is a 2KW+ Hot Air Gun or gas blowtorch, and a foam roller if you’re applying to square posts (stapler + knife required for Wrap & Tack). Postsaver rot protected posts are suitable for installation with fence post concrete.

1. Measure Hole Depth

2. Position on the post & heat shrink on

3. Install the post in all the normal ways

Who Uses Postsaver Pro-Wraps?

Anyone installing wooden fencing can benefit from 20 year guaranteed fence post protection by choosing Postsaver Pro-Wraps